top of page

Printing machineries

Logo printing machine controller

  • LED display with touch screen

  • Simple servo fixed-length control

  • Supports 8 in/8 out

  • Pulling raw material with mark sensor for secondary printing

  • Supports manual/automatic pulling function

  • Able to open or close the UV lamp cover during the pulling actionl

  • Supports pull completion and mark sensor failling signal

  • Run-time print counting

Logo printing controller
Screen printing machine controller

  • The operation interface adopts touch-sensitive man-machine

  • Quad-axis servo motor control: feeding, discharging and two squeegee hosts

  • Supports 36 in/28 out (status indicators are provided on the I/O board to facilitate on-site troubleshooting)

  • Pulling raw material with mark sensor for secondary printing

  • Supports system parameter setting mode to adapt to the adjustment of customized mechanism

  • Printing conditions (scraping length, scraping speed, pulling length, pulling speed and pulling tension) can be set separately

  • Stores 100 settings of working condition

  • Control the opening and closing of the UV light lamp cover

  • Run-time print counting

Screen printing controller
Die-cutting machine controller

  • Touch-screen user friendly interface

  • Quad-axis servo motors: die-cutting host A, die-cutting host B, drawing and bronzing film

  • Supports 36 in/28 out (status indicators are provided on the I/O board to facilitate on-site troubleshooting)

  • Die-cutting or hot-stamping can be switched via the interface, and die-cutting hosts can be turned on or off

  • Pulling raw material and hot stamping filming with mark sensor for secondary printing

  • Supports speed setting via the interface or the knob

  • Supports 100 program settings of process

  • Run-time production count

  • The scrap axis and the polishing axis can be turned on or off or speed setting individualy

Die cutting machine controller
Short rotary printing machine controller

  • Touch-screen user friendly interface

  • Controls four to eight color printing host via the setting on the interface

  • Available in full-rotation or semi-rotary printing mode, printing or car washing modes

  • Supports 36 in/32 out (status indicators are provided on the I/O board to facilitate on-site troubleshooting)

  • Supports RS232/422/485 communication mode to control UV drying unit output

  • Control over opening or closing of the UV lamp cover

  • Supports 100 program settings of process

  • Control units for traverse movement of each printing bed and synchronous speed regulation of ink rollers (optional)

  • Printing speed up to 300 sheets/min

Web Printing Controller
Logo inspection machine controller

  • 5.7-inch LCD 320*240, 24 key settings

  • Supports 24 In/20 Out

  • Two-axis servo controller, receiving shaft and discharging shaft

  • Matched with a variety of brands of electric eyes, and the timing of multi-stage speed reduction and the setting value of the meter can be selected in the parameter content, allowing users to use it flexibly

  • Required length and gap of the process can be set according to the different manufacturing processes of the products.

  • Built-in VR speed adjustment, which can facilitate the operator to quickly adjust the machine

bottom of page