Electric Wiring Machineries

5.7" LCD display, user friendly interface which supports Chinese and English
Up to eight-axis servo motor control, providing linear interpolation between each axis
Support subprogram calls, simple program settings
Provides USB flash drive file storage, which is convenient for file management and adjustment
Stores commonly used programs, and they can be used directly after loading, which is super convenient
High product precision and high production capacity with precise positioning servo motors
Independently set I/O action with 64 in/64out
User friengly single action, automatic action and analog functions adjustment
High production capacity with yhe motor and the cylinder work synchronously
A variety of machine shapes are available, such as flat winding, wrapping, rotor winding, special winding, etc.

5.7" LCD display + buttons, and all setting and runtime status are clear at a glance
Quad-axis servo control interface: take-up, bow, pre-twisted and spool
Only twist distance and wire feeding speed needed to be set, all other control parameters will be calculated by the controller
The bobbin cable has a fine-tuning feature to improve the deformation of the spool wall
Real-time tension value is available to be displayed
Settings of wire feeding speed and wire pitch can be modified during operation
Supports 100 program settings of common used products
Available in single twist, triple twist, multi twist, etc.
It is suitable for wire and cable equipment to be used as wire stranded equipment

LCD display, push-button user friendly interface
Control two-axis frequency conversion: wire feeding and winding
PID wire feeding speed control according to the feedback signal of the pendulum mechanism
Supports product meter and weight display and control
Parameters are easily set according to customized needs
Slip display in run-time
Supports wire spooling feature
Oblique axis wire spooling feature (optional)

Winding axis available in AC servo motor or stepper motor
LCD + Keybpard, supports multi-language
Program editing adopts inquiry-style narrative, intuitive, easy to learn, easy to understand, and easy to operate
Supports 200 steps of operation for each program, and can store 200 program settings
Supports PC-based program editing
Supports variety of machine head types, side-slider type, belt type, rack type, tape wrapping machine, etc.
Supports multi-step continuous action, and no deceleration between steps
Provides a teaching editing method for simple adjustment
Provides two sets of speed control interfaces, which can be connected to VR knobs or pedal speed control switches
Spindle winding speed and wire pitch can be changed at any time during operation
Supports 16 in/16 out

Touch-screen user interface
Four-axis stepping motor control interface: front feeding, rear feeding, cutterand twisting
Supports 16 in/16 out pins
Processing type available: single-end stripping, double-end stripping, full stripping, half stripping, twisted or untwisted, short, etc.
Supports system parameter setting mode to adapt to the adjustment of customized mechanism
100 settings of working condition
The wire feeding speed is up to 12 M/min (accuracy 0.01mm)
Shows run-time production quantity